All operations with the exception with time-date stamping shall be mechanical in nature. Solenoid-operated cutter shall not be allowed.
Ticket drive shall be by a shuttle driven by a cam and arm. Ticket chutes, shuttle and cutting assembly shall be of stainless stell to resist
wear and corrosion. All other parts shall be zinc-plated to prevent corrosion. Built-in safety feature prevents issue of more than one ticket
for each machine operation.
Logic controller shall be solid state with only Interface Relays. All logic is T2L contained on a plug-in circuid board. Controller shall
contain a non-resettable counter which registers one digit for each ticket issued. In addition, tickets are sequentially numbered to provide
a double check in auditing.
A low-level light, located on the front surface of the housing, indicates a ticket level of less than 500 tickets when OFF. A buzzer indicates
a ticket in the throat for customer. A ticket-jam alarm logic is built into controller. With the addition of one special relay, unit wil indicate
if a ticket jams in the machine.
Cold-rolled aluminum steel - 16Ga.
Finish - baked enamel (Traffic Yellow, White, or Earth Tones)
Height: 48"   Width: 12"   Depth: 27" including 6" overhang
Window opening shall provide view of illuminated clock face to driver
The housing is provided with removable top for easy access to mechanism. Lower housing door is removable for easy access tocontroller and ticket
magaine. Ticket Magazine - stainless steel.